diff --git a/drivers/usb/musb/Makefile b/drivers/usb/musb/Makefile
index f2ccd9f..12e115e 100644
--- a/drivers/usb/musb/Makefile
+++ b/drivers/usb/musb/Makefile
@@ -29,6 +29,7 @@
 COBJS-$(CONFIG_MUSB_UDC) += musb_udc.o musb_core.o
 COBJS-$(CONFIG_USB_DAVINCI) += davinci.o
 COBJS-$(CONFIG_USB_OMAP3) += omap3.o
+COBJS-$(CONFIG_USB_DA8XX) += da8xx.o
 
 COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)
diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c
new file mode 100644
index 0000000..40bfe44
--- /dev/null
+++ b/drivers/usb/musb/da8xx.c
@@ -0,0 +1,139 @@
+/*
+ * da8xx.c - TI's DA8xx platform specific usb wrapper functions.
+ *
+ * Author: Ajay Kumar Gupta <ajay.gupta@ti.com>
+ *
+ * Based on drivers/usb/musb/davinci.c
+ *
+ * Copyright (C) 2009 Texas Instruments Incorporated
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <common.h>
+
+#include "da8xx.h"
+
+/* MUSB platform configuration */
+struct musb_config musb_cfg = {
+	(struct	musb_regs *)DA8XX_USB_OTG_CORE_BASE,
+	DA8XX_USB_OTG_TIMEOUT,
+	0
+};
+
+/*
+ * This function enables VBUS by driving the GPIO Bank4 Pin 15 high.
+ */
+static void enable_vbus(void)
+{
+	u32 value;
+
+	/* configure GPIO bank4 pin 15 in output direction */
+	value = readl(&davinci_gpio_bank45->dir);
+	writel((value & (~DA8XX_USB_VBUS_GPIO)), &davinci_gpio_bank45->dir);
+
+	/* set GPIO bank4 pin 15 high to drive VBUS */
+	value = readl(&davinci_gpio_bank45->set_data);
+	writel((value | DA8XX_USB_VBUS_GPIO), &davinci_gpio_bank45->set_data);
+}
+
+/*
+ * Enable the usb0 phy. This initialization procedure is explained in
+ * the DA8xx USB user guide document.
+ */
+static u8 phy_on(void)
+{
+	u32 timeout;
+	u32 cfgchip2;
+
+	cfgchip2 = readl(&davinci_syscfg_regs->cfgchip2);
+
+	cfgchip2 &= ~(CFGCHIP2_RESET | CFGCHIP2_PHYPWRDN | CFGCHIP2_OTGPWRDN |
+		      CFGCHIP2_OTGMODE | CFGCHIP2_REFFREQ);
+	cfgchip2 |= CFGCHIP2_SESENDEN | CFGCHIP2_VBDTCTEN | CFGCHIP2_PHY_PLLON |
+		    CFGCHIP2_REFFREQ_24MHZ;
+
+	writel(cfgchip2, &davinci_syscfg_regs->cfgchip2);
+
+	/* wait until the usb phy pll locks */
+	timeout = musb_cfg.timeout;
+	while (timeout--)
+		if (readl(&davinci_syscfg_regs->cfgchip2) & CFGCHIP2_PHYCLKGD)
+			return 1;
+
+	/* USB phy was not turned on */
+	return 0;
+}
+
+/*
+ * Disable the usb phy
+ */
+static void phy_off(void)
+{
+	u32 cfgchip2;
+
+	/*
+	 * Power down the on-chip PHY.
+	 */
+	cfgchip2 = readl(&davinci_syscfg_regs->cfgchip2);
+	cfgchip2 &= ~CFGCHIP2_PHY_PLLON;
+	cfgchip2 |= CFGCHIP2_PHYPWRDN | CFGCHIP2_OTGPWRDN;
+	writel(cfgchip2, &davinci_syscfg_regs->cfgchip2);
+}
+
+/*
+ * This function performs DA8xx platform specific initialization for usb0.
+ */
+int musb_platform_init(void)
+{
+	u32  revision;
+
+	/* enable psc for usb2.0 */
+	lpsc_on(33);
+
+	/* enable usb vbus */
+	enable_vbus();
+
+	/* reset the controller */
+	writel(0x1, &da8xx_usb_regs->control);
+	udelay(5000);
+
+	/* start the on-chip usb phy and its pll */
+	if (phy_on() == 0)
+		return -1;
+
+	/* Returns zero if e.g. not clocked */
+	revision = readl(&da8xx_usb_regs->revision);
+	if (revision == 0)
+		return -1;
+
+	/* Disable all interrupts */
+	writel((DA8XX_USB_USBINT_MASK | DA8XX_USB_TXINT_MASK |
+		DA8XX_USB_RXINT_MASK), &da8xx_usb_regs->intmsk_set);
+	return 0;
+}
+
+/*
+ * This function performs DA8xx platform specific deinitialization for usb0.
+ */
+void musb_platform_deinit(void)
+{
+	/* Turn of the phy */
+	phy_off();
+
+	/* flush any interrupts */
+	writel((DA8XX_USB_USBINT_MASK | DA8XX_USB_TXINT_MASK |
+		DA8XX_USB_RXINT_MASK), &da8xx_usb_regs->intmsk_clr);
+	writel(0, &da8xx_usb_regs->eoi);
+}
diff --git a/drivers/usb/musb/da8xx.h b/drivers/usb/musb/da8xx.h
new file mode 100644
index 0000000..93234f0
--- /dev/null
+++ b/drivers/usb/musb/da8xx.h
@@ -0,0 +1,103 @@
+/*
+ * da8xx.h -- TI's DA8xx platform specific usb wrapper definitions.
+ *
+ * Author: Ajay Kumar Gupta <ajay.gupta@ti.com>
+ *
+ * Based on drivers/usb/musb/davinci.h
+ *
+ * Copyright (C) 2009 Texas Instruments Incorporated
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef __DA8XX_MUSB_H__
+#define __DA8XX_MUSB_H__
+
+#include <asm/arch/hardware.h>
+#include <asm/arch/gpio_defs.h>
+#include "musb_core.h"
+
+/* Base address of da8xx usb0 wrapper */
+#define DA8XX_USB_OTG_BASE  0x01E00000
+
+/* Base address of da8xx musb core */
+#define DA8XX_USB_OTG_CORE_BASE (DA8XX_USB_OTG_BASE + 0x400)
+
+/* Timeout for DA8xx usb module */
+#define DA8XX_USB_OTG_TIMEOUT 0x3FFFFFF
+
+/*
+ * DA8xx platform USB wrapper register overlay.
+ */
+struct da8xx_usb_regs {
+	dv_reg	revision;
+	dv_reg	control;
+	dv_reg 	status;
+	dv_reg 	emulation;
+	dv_reg 	mode;
+	dv_reg 	autoreq;
+	dv_reg 	srpfixtime;
+	dv_reg 	teardown;
+	dv_reg 	intsrc;
+	dv_reg 	intsrc_set;
+	dv_reg 	intsrc_clr;
+	dv_reg 	intmsk;
+	dv_reg 	intmsk_set;
+	dv_reg 	intmsk_clr;
+	dv_reg 	intsrcmsk;
+	dv_reg 	eoi;
+	dv_reg 	intvector;
+	dv_reg 	grndis_size[4];
+};
+
+#define da8xx_usb_regs ((struct da8xx_usb_regs *)DA8XX_USB_OTG_BASE)
+
+/* DA8XX interrupt bits definitions */
+#define DA8XX_USB_TX_ENDPTS_MASK  0x1f	/* ep0 + 4 tx */
+#define DA8XX_USB_RX_ENDPTS_MASK  0x1e	/* 4 rx */
+#define DA8XX_USB_TXINT_SHIFT	  0
+#define DA8XX_USB_RXINT_SHIFT	  8
+
+#define DA8XX_USB_USBINT_MASK	  0x01ff0000	/* 8 Mentor, DRVVBUS */
+#define DA8XX_USB_TXINT_MASK \
+		(DA8XX_USB_TX_ENDPTS_MASK << DA8XX_USB_TXINT_SHIFT)
+#define DA8XX_USB_RXINT_MASK \
+		(DA8XX_USB_RX_ENDPTS_MASK << DA8XX_USB_RXINT_SHIFT)
+
+/* DA8xx CFGCHIP2 (USB 2.0 PHY Control) register bits */
+#define CFGCHIP2_PHYCLKGD	(1 << 17)
+#define CFGCHIP2_VBUSSENSE	(1 << 16)
+#define CFGCHIP2_RESET		(1 << 15)
+#define CFGCHIP2_OTGMODE	(3 << 13)
+#define CFGCHIP2_NO_OVERRIDE	(0 << 13)
+#define CFGCHIP2_FORCE_HOST	(1 << 13)
+#define CFGCHIP2_FORCE_DEVICE 	(2 << 13)
+#define CFGCHIP2_FORCE_HOST_VBUS_LOW (3 << 13)
+#define CFGCHIP2_USB1PHYCLKMUX	(1 << 12)
+#define CFGCHIP2_USB2PHYCLKMUX	(1 << 11)
+#define CFGCHIP2_PHYPWRDN	(1 << 10)
+#define CFGCHIP2_OTGPWRDN	(1 << 9)
+#define CFGCHIP2_DATPOL 	(1 << 8)
+#define CFGCHIP2_USB1SUSPENDM	(1 << 7)
+#define CFGCHIP2_PHY_PLLON	(1 << 6)	/* override PLL suspend */
+#define CFGCHIP2_SESENDEN	(1 << 5)	/* Vsess_end comparator */
+#define CFGCHIP2_VBDTCTEN	(1 << 4)	/* Vbus comparator */
+#define CFGCHIP2_REFFREQ	(0xf << 0)
+#define CFGCHIP2_REFFREQ_12MHZ	(1 << 0)
+#define CFGCHIP2_REFFREQ_24MHZ	(2 << 0)
+#define CFGCHIP2_REFFREQ_48MHZ	(3 << 0)
+
+#define DA8XX_USB_VBUS_GPIO	(1 << 15)
+#endif	/* __DA8XX_MUSB_H__ */
+